Apple AIRPORTCARD - Airport Networking Network Card Informacje Techniczne Strona 49

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 48
Cause
You do not have an active network connection.
Solution
Check to see if you have an active network connection.
To make sure your network connection is active
1 Check to see if the wired network icon (below on the left) is present on the
color graphics display. If the icon is present, the HP all-in-one is connected to
the network.
The icon on the left shows an active wired network. The icon on the right
shows an inactive network.
Wired network icon
2 If the wired network icon is not present, check the cable connections from the
HP all-in-one to your gateway or router to ensure connections are secure.
3 Make sure the HP all-in-one is connected to the network with a CAT-5
Ethernet cable.
4 Check the two Ethernet indicator lights on the top and bottom of the RJ-45
Ethernet jack on the back of the HP all-in-one. The lights indicate the
following:
a Top light: If this light is a solid green, the device is properly connected to
the network, and communications have been established. If the top light is
off, there is no network connection.
b Bottom light: This yellow light flashes when data is being sent or received
by the device over the network.
5 If the connections are secure, turn off the power on your HP all-in-one, and
then turn it on again. On the control panel of the HP all-in-one, press the On
button to turn off the HP all-in-one, and then press it again to turn it on. Also,
turn off the power on your router and then turn it on again.
To establish an active network connection
1 If the wired network icon is not active, check the cable connections from the
HP all-in-one to your gateway or router to ensure connections are secure.
2 If the connections are secure, press the On button to turn off the HP all-in-
one, and then press it again to turn it on. Also, turn off the power on your
router and then turn it on again.
I received a System Requirements Error: No TCP/IP
Cause
Your Local Area Network (LAN) card (NIC) is not installed properly.
Chapter 9
46
Przeglądanie stron 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag