Apple Logic Board Informacje Techniczne Pobierz pdf (Strona 50)

WHICH SLOT?

Enter the slot of the first memory card. The system will

prompt for the type of card present 128K, 64K, 32K, 16K.

Enter the card type (ex. 128K)

If this card was in slot 0 the system will ask:

DO YOU WANT TO SAVE ROOM FOR BASIC?

Enter the appropriate response. If N, the system will ask,

one bank at a time, whether you want to use this bank. If the

relocated DOS is being used, be sure to reserve Bank 2 of the 64K

or 128K board which contains the relocated DOS.

Repeat this procedure for all the memory cards present in

the system.

Next, select option 2 to change the disk parameters. The

following options will be displayed:

<1> CHANGE SLOT AND DRIVE

<2> CHANGE DIRECTORY SIZE

<3> EXIT

Select the appropriate option.

1) To change the slot and drive for the PSEUDO DISK. The current

values are displayed at the top of the screen just under the

2) To change the number of directory sectors to be allocated for

the PSEUDO DISK (default = 4 sectors)

Once all the parameters have been entered, exit this menu.

Then, to exit back to the main menu select option 3.

The file PSEUDO PARAMETERS will then be updated with the new

parameters, etc., and the main menu displayed. The PSEUDO DISK is

not active at this time.

III. INSTALLING THE PSEUDO DISK

Once the disk parameters, location and type of memory boards

have been entered (above), the PSEUDO DISK is ready to be

installed.

Select option 3.

The system will load the appropriate Binary program PSEUDO

NRM or PSEUDO MVD, depending upon whether a normal or relocated

DOS is being used and initialize the PSEUDO DISK with an empty

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 76 77

Brak uwag

Apple Logic Board Informacje Techniczne Strona 50