Apple PC Serial and Parallel Card Instrukcja Użytkownika Pobierz pdf (Strona 8)

Inserting the PC Serial and Parallel Card

11 Flip the PC Serial and Parallel Card over and insert it into the first (top) PCI slot.

IMPORTANT

Always hold the card by its edges. Don’t touch any of the

components on the card.

Place one hand behind the PCI slots in the area indicated below. With your

other hand, align the card’s connector end (gold in color) with the first (top)

PCI expansion slot. The ports on the card should face the port access opening

on the computer’s back panel. Press the card in. When the card is fully

inserted, you won’t be able to see the gold-colored connector any more.

m Don’t rock the card from side to side; press it straight into the slot. Rocking

the card can damage the PCI slot.

m Don’t force the card. If you meet a lot of resistance, pull the card out and

try again.

m To see if the card is connected, pull it gently. If it resists, it is connected.

Support the slots with your hand in this

area only (shown tinted here) to avoid

pressing against the soldered pins on

the back of the PCI slots.

First PCI slot

Reinstall the screw

to secure the card

in place.

Chapter 1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 83 84

Brak uwag

Apple PC Serial and Parallel Card Instrukcja Użytkownika Strona 8