Apple CPX1 Dokumentacja Pobierz pdf (Strona 29)

Chassis Plans CPX1-241 Technical Reference Chapter 6 - Installation

Page 21

Chapter 6 - Installation

Rack Installation

To mount the CPX1-241 in a rack, it is first important you identify the correct holes to mount to. Please see the

following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is

trying to install into the wrong holes.

Because there are multiple styles of racks, it is not possible to provide detailed instructions on mounting the

equipment.

Figure 9 - Rack Mounting Hole Spacing

Chassis Plans offers free Rack Rulers to assist in installing equipment into racks. You should have received one

with your order. To request more, fill out the short form at http://www.chassis-plans.com/form_rack_ruler.html

and we’ll send you as many as you want. These are invaluable for installing systems into racks.

Installing the CPX1-241

The LCD display is mounted in front of the rack due to its width. A Mounting Adapter Bracket is provided which

is first installed into the rack and the LCD then mounted to the adapter bracket. The LCD display attached to the

Mounting Adapter Bracket in the rear by the four screws in the middle plus one at each corner for installations

with higher shock and vibration loads.

Four Mounting Adapter Brackets are offered to account for racks with different depths from the front surface to

the rack rails. See the following Figure for attaching the Mounting Adapter Bracket to the rack.

Chassis Plans can provide custom mounting options as required by the application if the standard brackets are

not sufficient.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Brak uwag

Apple CPX1 Dokumentacja Strona 29