Apple Xserve (Early 2008) DIY Procedure for Drive Interc Instrukcja Użytkownika Pobierz pdf (Strona 11)

Xserve (Late 2006/Early 2008) Drive Interconnect Backplane Replacement Instructions 11

Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the order 3.

shown, to prevent the duct from warping. Do not overtighten the screws.

Replacing the Apple Drive Modules

Slide the rst Apple drive module into its bay until it is rmly seated. Then press the handle 1.

in ush with the front panel.

Repeat for all other installed drive modules.2.

Closing the Xserve

Replace and secure the cover.1.

Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve 2.

in the rack.

If the server case was locked, use the enclosure key to lock the security lock on the front 3.

panel.

Warning: Never turn on the server unless all of its internal and external parts are in place

and it is closed. Operating the server when it is open or missing parts can damage it or

cause injury.

1 2 ... 6 7 8 9 10 11 12

Brak uwag

Apple Xserve (Early 2008) DIY Procedure for Drive Interc Instrukcja Użytkownika Strona 11