Apple Xserve (Early 2008) DIY Procedure for Logic Board Instrukcja Użytkownika Pobierz pdf (Strona 29)

Xserve (Late 2006/Early 2008) Logic Board Replacement Instructions 29

Replacing the PCI Riser Cards and Expansion Cards

Align the riser with slot 2 on the logic board and press to seat the card. 1.

Tighten the captive screws that secure the riser bracket to the back panel.2.

Repeat for the riser in slot 1.3.

Note: If no risers are installed, install the blanks held in place by the same screws.

Replacing the Power Supplies

Slide the rst power supply all the way into the bay, and then press the handle to seat the 1.

power supply and lock it in place.

Slide the power supply in and

press the handle to seat it.

Repeat for the second power supply, if installed.2.

1 2 ... 24 25 26 27 28 29 30 31

Brak uwag

Apple Xserve (Early 2008) DIY Procedure for Logic Board Instrukcja Użytkownika Strona 29